A C R O S S - 7 5 0

Made from the superb PCOCC-A material developed by Furukawa using special heat and extrusion techniques. The superb RCA plugs are made with Rhodium plating finish giving an audiophile high quality, dynamic and precise performance with a large soundstage. The Across style outer material coatings give an air insulation to the cable which gives ACROSS-750 its unique and astonishing sound. This cable will give you a high-end performance.

A C R O S S - 9 0 0 - XLR/XLR

______________________________________________________________________________________________

______________________________________________________________________________________________

As well as the PA-02R and SLSC high quality RCA plugs OYAIDE also offer a very high quality XLR design...

F O C U S   1  -  X L R   P L U G S   

A high definition sound projector

Oyaide enhance product quality by paying careful attention to each detail, structural characteristic, texture and appearance. Only when such details are integrated successfully, a product is completed perfectly. It took a whole year to complete "FOCUS 1" XLR connector since the first product planning. The design is inspired by an appearance of lens on a camera which represent subtle and exquisite sound image of FOCUS 1. As a result of integration of high-quality sound and efficient design, a masterpiece XLR plug, FOCUS 1, was produced by uncompromising spirit and technical know-how of Oyaide Electric.

One-touch push-pull function is the entirely-new locking system. You can lock Just by inserting FOCUS 1 into the inlet and unlock by pulling the tip ring. Ball bearing system, manufactured by ultraprecision machining, is employed for its locking mechanism. These functions deliver smooth and absolute plug connection.
In addition, an innovative idea is utilized for the contact of FOCUS1.
The No.1 contact pin (earth) is 3mm longer than other pins, so that it contacts fast for the purpose of protection from POP noise at the moment of connection.
Furthermore, bladed cable clump is employed for cable fixture. By applying this clumping system, it is possible to connect the chassis ground and stabilize cable simultaneously.

Due to its 12mm install cable O.D. (when the cable bushing is removed), it gives infinite possibility to do-it-yourselfers and its tapered insertion hole makes cable installation easier and avoids possible cable disconnection by bending.
Furthermore, a rubber ring which is installed at the junction of the body and housing acts as vibration damper and loosening protector.

The contact pins of FOCUS 1 are made from phosphor bronze bar which is precisely shaped by CNC machining. After careful machine barreling, silver (inner) and rhodium (outer) are directly plated on them. Then, these pins are molded into highly rigid 30% glass filled PBT which insures high-speed vibration attenuation.
The body and housing, processed by CNC machining, are high-density and have high shielding performance compared to an existing lost-wax processed body. For its surface treatment, hard chrome plating is coated like a body of camera.

______________________________________________________________________________________________