S R B N - banana plugs

S P S L - forks

The SRBN main body is trimmed from an 8 mm phosphor bronze bar and then its insertion part is slit up in a cross shape and divided in quarters to ensure maximum contact area in the terminal. The size was determined based on WBT’s speaker terminals, but it can fit into any terminals. After more than ten times of repeated cut and try in micron scale, SRBN was exquisitely-designed to be inserted smoothly and not to become loosened easily. The pleasure of using the SRBN is inexplicable - try them !

F O C U S   1  - XLR connectors

The contact pins of FOCUS 1 are made from phosphor bronze bar which is precisely shaped by CNC machining. After careful machine barreling, silver (inner) and rhodium (outer) are directly plated on them. Then, these pins are molded into highly rigid 30% glass filled PBT which insures high-speed vibration attenuation.

The body and housing, processed by CNC machining, are high-density and have high shielding performance compared to an existing lost-wax processed body. For its surface treatment, hard chrome plating is coated like a body of camera.

One-touch push-pull function is the entirely-new locking system. You can lock Just by inserting FOCUS 1 into the inlet and unlock by pulling the tip ring. Ball bearing system, manufactured by ultraprecision machining, is employed for its locking mechanism. These functions deliver smooth and absolute plug connection.
In addition, an innovative idea is utilized for the contact of FOCUS1.
The No.1 contact pin (earth) is 3mm longer than other pins, so that it contacts fast for the purpose of protection from POP noise at the moment of connection.
Furthermore, bladed cable clump is employed for cable fixture. By applying this clumping system, it is possible to connect the chassis ground and stabilize cable simultaneously.

Due to its 12mm install cable O.D. (when the cable bushing is removed), it gives infinite possibility to do-it-yourselfers and its tapered insertion hole makes cable installation easier and avoids possible cable disconnection by bending.
Furthermore, a rubber ring which is installed at the junction of the body and housing acts as vibration damper and loosening protector.

SPYT - spade connectors

GYT - spade connectors

We consider that the cable terminal is one of the most important parts in the audio components. SPYT (silver) and GYT (gold) are especially designed for additional tone control without changing cable character. After it is punched out from 2mm thick oxygen-free copper board, it is hand-polished twice. Then, SPYT is plated silver (inner) and palladium (outer) and GYT is plated 24K gold. In order to produce a good product, Oyaide Electric doesn't hesitate to take time-consuming process. The form is cut in two-size adjustment (6mm and 8mm) to be applied to almost all speaker post.

_________________________________________________

_________________________________________________

SLSC - RCA connectors

The plugs are the gateways of signal transmission and define the quality of sound.
As the original plug of SL series, SLSC and SLSB are produced to maximum potential of cable. We employed 4N pure silver which has the highest electrical conductivity in all metals for the contact pin. SLSC/SLSB actualize transmitting high-quality and lossless sound.

SLSB - BNC connectors